Connecting the Wireless ThumbStick Controller to your Wii Remote
1.
Turn on your Wii Console and check your Wii Remote is functioning correctly with your Wii.
2.
Connect the Receiver to your Wii remote as explained in ‘Set up of Receiver’
3.
You will notice the Receiver LED light will start to flash.
4.
Make sure the analogue stick of the Wii ThumbStick Controller is in a centre neutral position
and switch ON the Power button.
5.
Press the FC (Force Connect) button on the Wireless ThumbStick Controller and you will
notice the Wireless ThumbStick Controller LED light will start to flash for 1-3seconds until a
connection is established.
6.
The ThumbStick Controller and Receiver will be paired automatically.
The LED’s on the ThumbStick Controller/Receiver will be permanently ON.
7.
To check if the connection is successful press the Z or C button on the ThumbStick
Controller, this will make the LED on the Receiver flash, indicating that the Wireless
ThumbStick Controller and its Receiver are connected.
This FC only has to be carried out for the first time, once connected it should automatically connect
when switched on.
Notes:
The Wireless ThumbStick Controller Adapter will switch itself off, if no connection is
made between the Wireless ThumbStick Controller Adapter and the Receiver.
If the analogue stick of the Wireless ThumbStick Controller is not in the centre
neutral position when the Wireless ThumbStick Controller is woken from sleep
mode or paired, it will cause the Control Stick on the ThumbStick Controller not to
function correctly causing incorrect game control during game play.
To rectify this power off the Wireless ThumbStick Controller and power it back on again, keeping the
analogue stick of the Wireless ThumbStick Controller is in a centre neutral position.
Power save (Sleep Mode)
The Wireless ThumbStick Controller features a Power Save mode.
1.
After pressing the FC button, if no connection is made between the Wireless ThumbStick
Controller and Receiver after 1 minute, the Wireless ThumbStick Controller will enter into a
sleep mode and the LED will turn OFF.
2.
If the Wireless ThumbStick Controller is left to idle for 5 minutes, the Wireless ThumbStick
Controller will enter into a sleep mode. Both LED’s on the Wireless ThumbStick Controller
and the Receiver on the Wii Remote will turn OFF.
