ZOOM ColdFire SDK
18
QuickStart Guide
5 Jumper/Switch Functionality
5.1 Jumper Settings for M5329EVB Development Kit
The following table describes the function of the jumpers on the MCF5329-10 Fire Engine.
CAN functionality is only available with the MCF5329-10 Fire Engine.
Table 5.1 – Jumper Switch Table
Jumper Settings
Function
JP9
Jmp 1–2
3–4
5–6
When all pins of J9 have jumpers (and no
jumpers are on J10), header DB9 can be
used as a UART header. (See Figure 5.2,
below.)
JP10
Jmp 1–2
3–4
5–6
When all pins of J10 have jumpers (and
no jumpers are on J9), header DB9 can
be used as a CAN header. (See Figure
5.2, below.)
JP8
Jmp 4–6
CAN Port 0 non-terminated data line.
(See Figure 5.3, below.)
Jmp 3–5
CAN Port 0 terminated data line. (See
Figure 5.3, below.)
J6
Jmp 2-4
5
JTAG (See Figure 3.3, earlier in this
document.)
Figure 5.2 – Jumper Settings for DB9 Header
1
26
5
1
26
5
J1
0
J
9
1
26
5
1
26
5
J1
0
J
9
Header DB9 as
UART header
Header DB9 as
CAN header