RTCU NX-200 Technical Manual V1.00
Advanced Automotive M2MI/IoT Gateway
Logic IO ApS.
Ph: (+45) 7625 0210
Holmboes Allé 14
Fax: (+45) 7625 0211
8700 Horsens
Page 14 of 45
Email: [email protected]
Denmark
Accessories for cable assembly.
Order-code
Name
RT-O-TYCO-H4
TYCO p/n: 794617-4
Tyco, Connector house 4 pins. Bag with 10 pcs
RT-O-TYCO-H6
TYCO p/n: 794617-6
Tyco, Connector house 6 pins. Bag with 10 pcs
RT-O-TYCO-H12
TYCO p/n: 1-794617-2
Tyco, Connector house 12 pins. Bag with 10 pcs
RT-O-TYCO-H16
TYCO p/n: 1-794617-6
Tyco, Connector house 16 pins. Bag with 10 pcs
RT-O-TYCO-CR
TYCO p/n: 794606-1
Tyco, Crimp Contacts for connector house. Wire size 0.2 to 0.5 mm
2
.
Bag with 100 pcs.
RT-O-TYCO-TOOL
TYCO p/n: 91501-1
Tyco, Crimp hand tool for easy assembly of TYCO crimp contacts.
Wire size 0.2 to 0.5 mm
2
Recommended tool:
Alternative tools:
Tyco 91501-1 (0.20 to 0.50mm
2
) RS 495-9675, Farnell 1111475
Tyco 91502-1 (0.05 to 0.15mm
2
) RS 495-9675, Farnell 1111476
Extraction tool:
Tyco 843996-6 extraction tool. RS 495-9704, Farnell 1111477
Connector Mini USB-B
The USB port is for programming and communication with the RTCU IDE (RACP compliant
application). A standard USB cable with a connector length of 10mm on the USB-B end can be used
between the device and the PC
Connector Ethernet
This is a standard 10Base-T/100Base-TX IEEE 802.3 compliant Ethernet connector. Please use an
appropriate connector and cable, such as a standard CAT-5 twisted pair patch cable
Connector USB-Host
These are standard full-speed USB-A host port connectors and used for communication with
accessories connected to the host port. These ports are supplied internally, and current
consumption is limited to 500mA
