Logic IO RTCU MX2 turbo Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 36

Logic IO RTCU MX2 turbo Скачать руководство пользователя страница 27

RTCU MX2 turbo Technical Manual V2.04

Logic IO ApS.

Ph: (+45) 7625 0210

Holmboes Allé 14

Fax: (+45) 7625 0211

8700 Horsens

Page 27 of 36

Email: [email protected]

Denmark

www.logicio.com

Antennas

GSM/UMTS

The RTCU MX2 turbo contains an SMA female connector for connecting a suitable GSM/UMTS
band antenna. When installing the antenna, please make sure that the antenna is not in close
proximity to metallic parts or anything else that can influence the efficiency of the GSM antenna.
Please consult the installation guide that follows the GSM antenna.

GNSS

The RTCU MX2 turbo supports GPS, GLONASS and QZSS so a suitable GNSS antenna must
therefore be used. The connection is with an SMB Male connector and the GNSS antenna must be a
3V active antenna with a SMB Female connector.

When installing the antenna, please make sure that the antenna has a reasonable view of the sky,
so that it can receive the weak signals from the satellites. Please also consult the installation guide
that follows the antenna.

Device identification label

The barcode found on the MX2 turbo unit contains the serial number. The first three digits in the
serial-number identify the unit type.
For the RTCU MX2 turbo this unique code is

292

or

286.

For the RTCU MX2 turbo-2G the code is

293

or 285.

The barcode format used: 2/5 Interleaved with Check Digit.

«
...
25
26
27
28
29
...
»

Содержание RTCU MX2 turbo





































Отзывы:

Нет отзывов