FIELDBOOK E1 User Guide
20
3. Plug the AC adapter connector to the DC-Jack socket on the left
side of the system.
4. Plug the power cord to the AC adapter.
5. Plug the other end of the power cord to a live wall outlet, at the
same time, the Power LED at front panel lights up.
-- For the power supply of this equipment, an approved power cord has
to be used.
-- Make sure the socket and any extension cord(s) you use can support
the total current load of all the connected devices.
--
Remove all power from the device prior to installing or removing any
accessories, hardware, or cables
-- Before cleaning the system, make sure it is disconnected from
any external power supplies (i.e. AC adapter).
2.2.3. Starting Your System
The Power button is found on the left side of the Tablet. Press the
Power button to start your system and check that if the Power LED
turns on.
After a few seconds, the system’s display will turn on and your system
will begin to execute.
