34
CLEANING THE RAIN COLLECTOR
1. Unscrew the funnel lid to the unlock position.
20
MAINTENANCE
BATTERY REPLACEMENT
If the low battery indicator “
” displayed in time section, it indicates that the console battery
power is low . You should replace all the batteries in the console at once
If the low battery indicator “ ” displayed in outdoor section, it indicates that the current channel
wireless outdoor sensor battery power is low . You should replace all the batteries in the current
channel sensor at once .
Low battery indicator for main unit
Low battery indicator for wireless sensor
CLEANING THE RAIN COLLECTOR
1 . Rotate the rain collector by 30° anticlockwise .
2 . Gently remove the rain collector .
3 . Clean and remove any debris or insects .
4 . Install all the parts when they are fully clean
and dried .
N
N
“Unlock” Position
“Lock” Position
N
TO CLEAN THE THERMO/HYGRO SENSOR
1 . Unscrew the 2 screws at the bottom of the radiation shield .
2 . Gently pull out the shield .
3 . Remove carefully any dirt or insects inside the sensor casing (Do not let the sensors inside get
wet) .
4 . Clean the shield with water and remove any dirt or insects .
5 . Install all the parts back when they are fully clean and dried .
PRECAUTIONS
-Keep and reading the “User manual” is highly recommended . The manufacturer and
supplier cannot accept any responsibility for any incorrect readings, export data lost and any
consequences that occur should an inaccurate reading take place .
-Do not subject the unit to excessive force, shock, dust, temperature or humidity .
-Do not cover the ventilation holes with any items such as newspapers, curtains etc .
-Do not immerse the unit in water . If you spill liquid over it, dry it immediately with a soft, lint-
free cloth .
-Do not clean the unit with abrasive or corrosive materials .
-Do not tamper with the unit’s internal components . This invalidates the warranty .
-Only use fresh batteries . Do not mix new and old batteries .
-Only use attachments / accessories specified by the manufacturer.
-Images shown in this manual may differ from the actual display .
-When disposing of this product, ensure it is collected separately for special treatment .
-Placement of this product on certain types of wood may result in damage to its finishing
for which manufacturer will not be responsible . Consult the furniture manufacturer’s care
instructions for information .
-The contents of this manual may not be reproduced without the permission of the
manufacturer .
CLEANING THE HYGRO-THERMO SENSOR
2. Gently remove the funnel lid of the rain collector.
3. Clean and remove any debris or insects in the funnel.
4. Wait until the parts are fully dry, and then reinstall them, and return the funnel lid on the rain
collector to a locked position.
1. Unscrew the two (2) screws at the bottom of the sensor casing.
2. Gently pull out the shield.
3. Carefully remove any dirt or insects inside the sensor casing, making sure the inside sensors remain dry.
4. Clean the shield with water and remove any dirt or insects.
5. Once the parts are fully clean and dry, reinstall them and replace the screws.
BATTERY REPLACEMENT
If the low battery indicator icon is displayed in the outdoor temperature and humidity section or
the corresponding CH section of the LCD console display, this indicates that the batteries in your
wireless weather sensor(s) are running low and should be replaced. Make sure to replace all batteries
at the same time.
CARE AND MAINTENANCE
24
MAINTENANCE
BATTERY REPLACEMENT
When low battery indicator “ ” is displayed
in OUT or CH section, it indicates that the
outdoor 7-IN-1 sensor and current channel
sensor battery power is low respectively.
Please replace with new batteries.
WIRELESS 7-IN-1 SENSOR MAINTENANCE
REPLACE THE WIND VANE
Unscrew and remove the wind
vane for replacement
REPLACE THE WIND CUP
1. Unscrew and remove the
top cap
2. Remove the wind cup for
replacement
CLEANING THE RAIN COLLECTOR
1. Rotate the rain collector by turning
it 30°anti-clockwise.
2. Gently remove the rain collector.
3.Clean and remove any debris or
insects.
4.Install the collector when it is clean
and fully dried.
CLEANING THE UV SENSOR AND
CALIBRATION
• For precision UV measurement,
gentle clean the UV sensor cover
• Over time, the UV sensor will
naturally degrade. The UV sensor
can be calibrated with a utility
grade UV meter, please refer to
Calibration section in previous
page for about the UV sensor
cablibration.
CLEANING HYGRO-THERMO
SENSOR
1. Remove the 2 screws at the
bottom of the radiation shield.
2. Gently pull out the shield.
3. Carefully remove any dirt or
insects on the sensor and
ventilation fan (do not let the
sensors inside get wet).
4.Clean the shield with water to
remove any dirt or insects.
5.Install all the parts back when
they are clean and fully dried.
TROUBLESHOOT
Problems
Solution
7-in-1 wireless sensor
is intermittent or no
connection
1. Make sure the sensor is within the transmission range
2. If it still not work, reset the sensor and resynchronize with
console.
Indoor wireless sensor
is intermittent or no
connection
1. Make sure the sensor is within the transmission range
2. Make sure the channel displayed match to the channel
selection on sensor
3. If it still not work, reset the sensor and resynchronize with
console.
No WiFi connection
1. Check for WiFi symbol on the display, it should be alway
on.
2. Make sure you connect to 2.4G band but not 5G band of
your WiFi router.
NOTE: The battery life of the outdoor weather sensor lasts about two (2) years. And will run even
longer with the built-in solar panel.
