8
Safety precautions
a) Always test gas line for leaks at connector with soapy water after making
connections.
b) The top lid must always be open when lighting the burner.
c) Use oven gloves and sturdy, long handled gas grill tools when cooking on the
grill.
d) Be prepared if an accident or fire should occur. Know where the first aid kit and
fire extinguishers are and know how to use them.
e) Keep any electrical supply cord and the fuel supply hose away from any heated
surfaces.
f) Always cook with great care.
g) Do not heat any unopened glass or metal container of food on the grill. Pressure
may build up and cause the container to burst, possibly resulting in serious
personal injury or damage to the grill.
Lighting instructions
Caution
: The lid must be open when lighting the burner!
Do not stand with your face directly over the gas grill when lighting it.
Your gas grill will have following method of ignition:
Pilot Gas Control Ignition(Main burner or main burner with side burner or
main burner with side burner and back burner ):
With all gas controls on the Gas grill in the “OFF” position, turn the gas cylinder
valve to the on position at the regulator. To create a spark you must press the gas
control knob (A) and hold in this position for 3-5 seconds to allow gas flow and then
turn anticlockwise to” HI” (B). It can spark to the burner lighting tube (C). You will
hear a “snap” from the igniter and you will also see a orange flame coming from the
burner lighting tube at the left side of the burner (D).
Continue to hold the gas control knob in for two seconds after the “snap”, this will
allow gas to flow completely down the burner tube (E) and insure ignition.
When the burner is alight, adjacent burners will cross light when their controls are
turned to “HI”
At “HI” setting the burner flame should be approximately 12-20mm long with a
minimum of orange flame. Turn the gas control knob fully anticlockwise for
minimum setting.
Should you have any difficulty lighting your gas grill following the above steps,
contact your dealer for advice.
If the automatic ignition can’t be used, please remove the cooking grill and heat
diffuser(hotplate ), and turn the valve anticlockwise to 90°
，
to light with BBQ lighter
in the distance of 5mm to the burner fire hole. Replace the cooking grill and heat
diffuser (hotplate), please wear the fireproof and heat resisting gloves.
