OPERATION (EN)
1. PREPARATION
You will need gas cylinder and proper regulators under the gas pressure to operate this gas grill. The
regulators should be comply with EN16129 with current version and national regulation.
ENERGY SAVING TIPS:
a) Reduce the opening time of the lid.
b) Turn the grill off as soon as cooking is completed.
c) Preheat the gas grill for 10 to 15 minutes only.
(Except for the first use)
d) Do not preheat longer then recommended.
e) Do not use a higher setting than required.
f) Connect the hose and regulator to the gas cylinder at the left side of the gas grill .Keeping in mind
that the gas cylinder must be kept away from heat and in a safe position .The hose dimension is
8-10mm diameter. The Length of hose recommended which shall not exceed 1.5m.
2. INSTALLATION
After purchasing your gas cylinder you will then be ready to set it up with your gas grill.
• Check all the parts, and make sure no part is missing. lf there are any parts missing, please contact
customer service.
• For assembly you will need a suitable screwdriver and spanner.
Only use tools that are intact and suitable for the job at hand.
Select a suitable place to set up the appliance. The appliance is positioned firmly on a flat, sufficiently
large surface area. Make sure the inlet and the outlet regulator are correct and suitable for the cylinder
valve and appliance.
lf the regulator is used outdoors, make sure that it is protected from atmospheric agents.
For connecting the gas cylinder, you will need a suitable spanner.
When connecting the flexible tube, make sure it is not twisted.
HOW TO CONNECT A GAS CYLINDER:
Gas Connector
Regulator
Gas Cylinder
