Logaire Atlanta Clean Air, Руководство по эксплуатации

Страница: 3 / 13

IMPORTANT MESSAGE TO THE OWNER
PLEASE ENSURE YOU FULLY READ PAGES 1 AND 2 AND
UNDERSTAND THE INFORMATION, EVEN IF YOU DON’T READ
THE ENTIRE MANUAL!!
We at Glen Dimplex Australasia Ltd thank you for choosing a Logaire fire and
are confident if installed and operated correctly will bring you many years of
pleasure. Our fires are designed to give you many years of warmth and
service, subject to the following three critical factors.
1.
A competent and suitably qualified installer must install your Logaire fire
correctly. Your Logaire dealer will be able to arrange professional instal-
lation for you.
2.
You must burn properly seasoned dry soft wood with a moisture content
less than 25%.
3.
You must know how to correctly operate your Logaire fire, particularly
on overnight burn cycles.
PLEASE NOTE THE FOLLOWING IMPORTANT POINTS:
When lighting the fire for the first time, ensure that the stove, glass, trim and
flue are all dusted to avoid particles sticking or discoloring the fire. Once
fired, some smoke and vapor will be released as the VHT painted surfaces
enter the final curing process. Do not be alarmed, open all windows and
doors in that room and close any internally opening doors. This curing proc-
ess will last for up to 3 hours as you run your fire on high and will only hap-
pen this one time. People with respiratory, heart or other relevant medical
conditions should avoid inhaling vapors during the curing process.
In Christchurch and Canterbury the Hestia Clean Air, Atlanta Clean Air,
Tawa MkIII and Pyros Clean Air Models
cannot
be installed with the No
Match system.
www.logaire.co.nz Phone: 0800-655-001 2