463-0620-01 Rev A. June-2015
3
620 Operation and Troubleshooting Guide
plus
CAN
®
DANGER
SAFETY SYMBOLS
This manual uses the following conventions to present IMPORTANT SAFETY INFORMATION to you.
Please read and follow ALL SAFETY INSTRUCTIONS.
IMPORTANT and URGENT SAFETY INFORMATION- A HAZARD THAT WILL, IF NOT AVOIDED, CAUSE
SERIOUS INJURY OR LOSS OF LIFE.
IMPORTANT SAFETY INFORMATION - A HAZARD THAT MIGHT CAUSE SERIOUS INJURY OR LOSS OF LIFE.
IMPORTANT SAFETY INFORMATION- A HAZARD THAT MAY, IF NOT AVOIDED, CAUSE
MINOR/ MODERATE INJURY.
IMPORTANT SAFETY INFORMATION- A HAZARD THAT MAY, IF NOT AVOIDED,
CAUSE EQUIPMENT DAMAGE.
CAUTION
NOTE
ADDITIONAL IMPORTANT INFORMATION.
This document must be completely read and understood prior to installing,
testing, or operating the equipment described within. Further, this document must be retained
for current and future users of this equipment. Failure to strictly follow the warnings and
dangers presented within this document could result in damage to equipment, damage to
property, bodily injury or death.
NOTE: THE SELLER HEREBY EXPRESSLY DISCLAIMS ALL WARRANTIES, EITHER EXPRESSED OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT
ANY LIABILITY IN CONNECTION WITH THE SALE OF SUCH PRODUCTS.
LOFA products are not designed or approved for use as critical components of any
safety device or system that is intended to prevent bodily injury, protect life, or prevent property damage.
The specifying Original Equipment Manufacturer (OEM) and/or Installer of any LOFA
panel is responsible for all safety labeling and operator education regarding the safe
operation of this panel and the operation of the specific machine that this panel is installed upon—
including conformance to exhaust emissions regulations.
Only trained and qualified persons may perform installation, testing, service, or repair
work on the LOFA product.
LOFA products are not designed for, or intended for use on applications requiring
explosive proof components. Further, LOFA products are not designed for, or intended
for application within hazardous or explosive environments.
The installer of this LOFA product is solely responsible for ensuring that all OSHA,
ANSI, CE, or other applicable standards are met with respect to LOFA panel
applicability, machine guarding, general safety guidelines, labeling, and warnings.
The installer of this LOFA panel and/or LOFA harness is responsible for sizing and
integrating a suitable fuse/ breaker on the un-switched DC circuit supplying power to
the LOFA panel.
NOTE: Please refer to www.LOFA.net for details on LOFA Industries, LLC warranty policies.
LOFA Industries, LLC has provided this document as a reference. We try to keep this document updated with the latest information
regarding your LOFA product. However, changes do occur and LOFA reserves the right to make changes to the design of the LOFA
products and supporting documentation without notice.