8
First installation
Switching on the video recorder for the first
time
Switch on using the blue
O
key on the remote
control, or the
O
key on the video recorder. The
first installation starts.
Display on video recorder
Picture and sound from the video recorder
on a TV set with a Euro AV connection.
When switching on for the first time the language
selection menu will appear on your TV screen.
Select station number 0 on the TV set. In
general, this station number is provided for the
optimal reception of video recordings.
The transmitter of the video recorder is factory
set to channel 36 in the UHF band.
If station number 0 of your TV set is not set to
channel 36, then you must search for and save
the video recorder transmitter.
Refer to the operating instructions for using the
menus of your TV set to find out how channel
36 is set to station number 0.
When you have found the transmitter, the first
installation menu will appear on the screen.
If the transmitter channel of the video recorder
suffers interference from a television station,
you must switch to another channel on the
video recorder (see Settings for the Video
Recorder– Set transmitter channel of the video
recorder, Page 23).
Settings for first installation
The first time you switch on the video recorder
you are requested to select a menu language
for the video recorder.
Use the remote control arrow
keys to select your preferred
language...
and confirm with
OK
.
If you have connected a Loewe TV set with Digital
Link Plus via the Euro AV socket, you will see the
menu straightaway. Other TV manufacturers also
use similar systems with different names
(EasyLink, Mega Logic, Project 50), these will also
display the menu immediately.
TV sets that detect the control voltage of the
video recorder also show the menu immediately.
If you have connected a different TV set via the
Euro AV socket, select the AV socket on the TV set
to which the video recorder is connected. This
varies from set to set. Refer to the operating
instructions of your TV set.
Picture and sound from the video recorder
on a TV set without Euro AV connection
If you have not used a Euro AV cable, then the
menu for the first installation of the video
recorder transmitter is transferred to the TV set
by the antenna connection.
1.Inst
OK
You will now be prompted to give the
installation location. After the station search
has ended, the stations will be sorted according
to your country.
Select the country in which you
are operating your TV set.
Confirm selection with
OK
.
The automatic search for stations will now
start.
During the search, the stations found are
displayed in the list. A status bar shows the
progress of the search.
On termination of the station search, the
stations are sorted. The menu then displays.
”Search ended”.
Close menu
or press the
M
-button,
to start data transfer if a TV set
equipped with Digital Link Plus
is connected (see page 20).
You can repeat the process at any time
(see
page 24).
OK
E
–––––––––––
./Language
––––––––––
M
E
Back
End
GB Language
D Sprache
F Langue
I Lingua
E Idioma
NL Taal
Set with OK
OK
–––––––––––
./Language
––––––––––
M
E
Back
End
GB Language
D Sprache
F Langue
I Lingua
E Idioma
NL Taal
Set with OK
OK
–––––––
../Location of Set
–––––––
M
E
Back
End
others ...
S
Sweden
SF Finland
Other Location
Select, store
with OK
OK
–––––
../Automatic Search
–––––
M
E
Back
End
no.
Chan.
Fine
Name
01
C02
00
BR3
02
C03
00
WDR
03
C05
00
KABEL
04
C06
00
RTL2
Search in
progress, wait!
M
BA_VCR_31251_020EU_GB2
17.04.2003, 15:29 Uhr
8