7 -
Initial installation
Select IP address assignment method
56
Select IP address
and subnet mask
Assignment
method
.
OK Activate
.
Automatic (DHCP):
IP address and subnet mask are
automatically issued by a DHCP server on your home
network.
➠
A DHCP server has to be set up on a device on the
network (e.g. WLAN router).
Input Static IP Address:
IP address and subnet mask are
entered manually.
Digit buttons:
Input digits of IP address.
EPG:
Enter dots.
Function of coloured buttons:
Yellow:
Delete last position.
Red:
Delete address.
OK:
Adopt
IP address.
➠
Proceed in the same way with the subsequent entry
of the subnet mask.
Network Setting
Afterwards you will see a summary of the settings.
OK
Adopt settings.
Backwards step by step for changes.
Select Server
If there is more than one media server in your home
network, you also have to select the server from which
you want to draw the data.
56
Select Server
.
OK
Activate
.
If your required media server should not be found the
first time, then you can press the
red button
to
Rescan
for media servers.
Connectivity display
After successful initial installation, the media selection opens up
(page 8) and the
Connectivity display
on the left of the TV set lights
up. The Connectivity display can, if required, be switched off via the
MediaNetwork menu (page 9).
Network Setting
Adopt
Adopt the following settings?
Network mode : Wireless
SSID : WLAN-Router_1
IP address : 192.168.1.123
Subnet mask : 255.255.255.0
OK
Select IP Address Assignment Method
Activate
Automatic (DHCP)
Input Static IP Address
OK
OK
Set Device IP Address
Adopt
IP Address 192.168.1.123_
OK
Input digits
Delete address
Delete last position
-
Input “.“
0
9
EPG
Select Server
Activate
Rescan
Media-Server 1
Media-Server 2
OK
OK
english