32
What to do when ...
Problem
Possible cause
Remedy
Connection of a decoder does not function
properly or not at all
No sound over the TV loudspeakers
All menus appear in the wrong language
No time, wake-up timer, sleep timer display
No display for sound identifier of stereo, mono
or 2-sound
a) The signal is not being decoded because the
decoder channel positions in Main
Information – AV Connections
– Decoder Channels – For Decoder at AV ...
are not highlighted in blue.
b) The sound is missing in decoder mode
because Sound from AV socket ... – has not
been set correctly under
Main Information – AV Connections –
Decoder Channels.
The “Sound over ...” item has been set to “Hi-fi
system” in the sound menu under “Sound”.
Menu language was accidentally set incorrectly.
In the “Displays” menu, “no” has been se-
lected for time, wake-up timer, sleep timer.
In the “Displays” menu, “no” has been
selected under “Sound identifier”.
a) Under the “For Decoder at AV ...” sub-item,
highlight the channel positions where the
decoder is necessary.
b) Correct setting (see decoder instructions).
Change setting to “TV”.
Set your menu language:
1. Call up the TV menu (if no menu is
displayed), press the
MENU
button.
2. Select the last menu line “Language” and
press the
OK
button.
3. Now select the correct language and
4. ... confirm with
OK
.
5. Remove the menu with the
END
button.
Highlight “yes” in the “Displays”
menu for each item.
Highlight “yes” in the “Displays” menu under
“Sound identifier”. Press the
END
button and
the channel name and sound standard will be
displayed. If the broadcasting station changes
the sound standard, this will also be indicated.
LCD_SAT_31715022_GB
10.08.2004, 15:44 Uhr
32
