Loewe klang 5, Руководство по эксплуатации

Страница: 11 / 20

Loewe klang 5 subwoofer
Operating manual
11
english
Connecting Loewe klang 5 subwoofer via LINE IN
Via the LINE IN analogue interface, you can connect the klang 5 subwoofer to your TV set or any audio source.
Disconnect all devices from the mains before connecting.
Connect the analogue audio output AUDIO OUT
(1
of the TV set or of another audio source with the LINE IN audio inputs LEFT/RIGHT of the subwoofer. To do so,
use the supplied 3.5 mm jack/2 x cinch audio cable. If an audio source is used, which has separate jacks for left/right; use appropriate standard cinch cables.
Connect the speaker of the Loewe klang 5 series that is positioned to the left of your TV set to the white jack (LEFT) of the subwoofer using a cinch cable.
Connect the speaker of the Loewe klang 5 series that is positioned to the right of your TV set to the red jack (RIGHT) of the subwoofer using a cinch cable.
Connect the cables to the speaker according to the corresponding installation instructions.
Use the mains cable supplied to connect the 220-240 VAC 50/60 Hz socket of the klang 5 subwoofer to a 220-240V 50/60 Hz socket.
If the menu item TV speaker is active in the sound components wizard of the Loewe TV set, it may happen that after turning on the TV set, the klang 5 subwoofer
connected to AUDIO OUT is operated at a high volume. Therefore, select in the sound components wizard first the Speaker system (AUDIO OUT)
(1
(see page
16) before connecting the subwoofer to the mains.
klang 5 subwoofer
TV-set
Speaker
Left Speaker
Right
Mains socket
Cinch cabel
Cinch cabel
Mains cable
Audio cable 3.5mm jack / 2x cinch
AUDIO OUT
(1 For Loewe TV sets as of chassis SL3xx and software V2.2.13 without AUDIO OUT connector, use the HEADPHONE connector.
„
Connecting Subwoofer via LINE IN