Loewe Individual 32 Compose Sound LED, Руководство по эксплуатации

Страница: 33 / 162

33 -
english
Positioning/aligning DVB-T antenna
If you are receiving one or more DVB-T stations with picture and sound
interference then you should change the installation location and align-
ment of the antenna. Ask your dealer to tell you which channels are used
to broadcast the DVB-T stations in your region.
➠
In normal TV mode, without other displays.
A DVB-T station is received and selected.
MENU: Call TV menu .
Select Settings ,
go to the menu line below.
Select Stations ,
go to the menu line below.
Select Manual adjustment ,
OK call manual adjustment.
The signal source is already on DVB-T due to the station
preselection.
Position and align the antenna in such a manner that
maximum values for
C/N and Level are obtained.
Blue button: Start search.
Search for DVB-T stations one after another and compare
values for C/N and Level .
Then position/align the antenna to the weakest station
so that maximum values for
C/N and Level are obtained.
The value for BER should be as low as possible.
Thereafter perform an automatic search for all DVB-T
stations (see page 44).
MANUAL ADJUSTMENT
Signal source DVB-T DVB-C DVB-S Ca
Channel E05
Frequency 177.50
MHz
Bandwidth 7 MHz
Name
C/N 81
Level 80
BER 0 E-7
Store
Search
SIGNAL SOURCE
Select the area in which you want the broadcaster to search here. You can use
the
button to automatically select station by station.
Initial installation
TV set as a monitor
You can also use your TV set just as a monitor, i.e. if you only use it with
a PC. The tuner in the TV set cannot be used in this mode.
You select the option to use the TV set just as a monitor when performing
the initial installation (see page 22).
Select AV connection.
The selected AV connection is shown when
switching the TV on. To choose other AV connections,
see page 35.
OK Proceed .
Initial setup continues with the Time and date setup (see
page 31).
OK
Proceed Back
INITIAL INSTALLATION WIZARD
Please specify which AV channel your TV set should switch on to.
INITIAL INSTALLATION
AV selection
HDMI3
HDMI2
HDMI1
PC IN
AVS
AV
VIDEO
OK