Loewe bild 1
Quick start manual
11
english
Switching the TV set ON/OFF
Initial installation wizard
Switching the TV set ON/OFF
Switching TV set to the standby mode
Switch the mains switch on the
bottom side of the device to position
I
.
The indicator on the front side lights
up white. The set is now in standby
mode.
Switching the TV set on/off via the local operating panel
To switch the TV set into operating mode or switch it
off into standby mode, press the button
on the
local control panel (bild 1.55) or the middle of the
joystick (bild 1.40/32).
bild 1.55: When pressing the buttons
M
/
V+
/
V–
, the
device switches on in the previously used mode (TV/
Radio), when pressing the button
R
, in the radio mode.
bild 1.40/32: When pushing the joystick in the direction
M
/
+
/
–
, the device switches on in the previously used
mode (TV/Radio), in the direction
R
, the device
switches on in the radio mode.
After switching on the TV set, it takes a few seconds
for further operating commands to be processed
(Exception: Quick Start Mode, see below). Your TV
set is ready for operation once the LED display
lights green.
Switching the TV set on by means of the Remote control
Press the
on/off key
.
Or:
Press the
TV key
.
The previously watched station will be called.
Or:
Press
numerical keys 1-9
.
The corresponding station will be called.
After switching on the TV set, it takes a few seconds for further
operating commands to be processed (Exception: Quick Start Mode,
see below). Your TV set is ready for operation once the LED display
lights green.
Switching the set off with the remote control (Standby)
Press the
on/off key
.
Before switching off the set with the mains switch,
we recommend you to switch it to standby mode.
Quick start mode
If you enable the Quick Start Mode and you switch on the TV set from
standby, the TV picture can be immediately seen without delay. You
can specify the times at which your device will be in the Quick Start
Mode. Please note that in this case you will have a higher energy
consumption.
You can find the Quick Start Mode under
System settings
ט
Control
ט
Quick start mode
.
Default setting for the Quick Start Mode:
off
.
bild 1.40/32
M
R
V+
V-
P+
P-
M
_
R
+
bild 1.55
Initial installation wizard
Initial installation after switching on for the first time
The Initial installation wizard starts automatically with an initial instal-
lation. It may be called repeatedly again.
If a parental lock is activated, the access code must be entered
before repeating initial installation.
First installation wizard routine
The selected settings affect the routine of the Initial installation wizard.
Select desired
Menu language
.
Selecting the language of the user guidance is the
wizard’s first step.
Then you simply follow the instructions on your TV
screen.
In most cases, the predetermined parameters can
be adopted.
The complete process of the initial installation is
described in the user manual.
The user manual file can be downloaded via the Loewe
support portal.
Deutsch
(de)
ǼȜȜȘȞȚțȐ
(el) Svenska (sv)
English
(en)
Polski
(pl)
Dansk
(da)
Français (fr) Magyar (hu) Português (pt)
Italiano
(it)
Suomi
(fi)
ȇɭɫɫɤɢɣ
(ru)
Español
(es)
Slovenš
č
ina (sl) Norsk (no)
Nederlands
(nl)
Sloven
č
ina (sk)
中文
(zh)
Č
eština (cs) Türkçe (tr)
INITIAL INSTALLATION - Menu language
Proceed with
Which menu language do you want to use for operation?
Menu
language