- 12
Deutsch
English
Français
Italiano
Español
Nederlands
Connection
➠
The TV set must be equipped with a Digital Audiolink.
You can either connect the subwoofer via a network cable (Cat. 5e or higher)
and the Converter Digital Audiolink / Audiolink (included with the Loewe
Subwoofer 525, order no. 69211T/U/W30) or you can connect it wirelessly to
a compatible audio source via the Module Wireless AudioLink which can be
optionally retrofitted.
If you wish to connect the subwoofer using the network cable, connect the
Converter Digital Audiolink / Audiolink to the 25-pin Audiolink socket
2
of the subwoofer. Use the network cable to connect the Digital Audiolink of
the TV set to the socket of the Converter Digital Audiolink / Audiolink.
Cabling for Loewe TV set (SL2xx) - Loewe subwoofer - loudspeaker
Connect the speaker cable to the speaker according to the appropriate instal-
lation instructions. One of the two wires of the speaker cables is usual marked
black. Connect this black marked cable to the black screw terminal on the
subwoofer
8
(connection diagram, see figure below) and the black terminal
on the speaker. Turn the screw connection of the respective terminal on the
subwoofer anticlockwise about 5 turns. Feed the wire end into the screw termi-
nal (top right-hand side) and close the screw terminal by turning it clockwise.
Connect the unmarked wires to the red terminals.
Use the mains cable supplied to connect the 220-240 V socket
9
of the sub-
woofer to a 220-240V 50/60 Hz socket.
Network cable
Loewe TV set (SL2xx)
Loewe Subwoofer
Mains cable
Center
Converter Digital Audiolink / Audiolink
Front
left
Front
right
Rear
left
Rear
right
Содержание Audiodesign 525
Страница 2: ......
Страница 3: ...Subwoofer...
