21
What to do when ...
Problem
Various menu items cannot be called (shown in
gray) or the menus for the EPG and teletext
modes of operation cannot be called
Timer recording, Change timer and Clear timer
are not shown in the Video menu
”Connections” cannot be called in the Video
menu (shown in gray)
The ”Stations” item in the TV menu and the
”Automatic station search” item in the main
information cannot be called
Control of the Loewe VCR with the video
control bar and the timer does not work or
does not work properly
General problems with connecting external
devices through an AV input
Picture shifted horizontally
Possible cause
”Simplified control” activated in main
information
No video recorder logged in
a) A timer recording is currently in progress
b) You are recording from the TV set with the
video bar
The child lock is activated. If these menus were
accessible, children could still set the programs.
a) The VCR’s Digital Link function is not activated
or not possible
b) Euro-AV cable not connected
c) Video recorder not logged in
a) The device is not logged in in the
”Connections” menu or is connected
differently to shown in the connection dia-
gram
b) The AV norm is set incorrectly
c) The AV signal is set incorrectly
The TV set is in the Southern hemisphere (e.g.
Australia, South Africa)
Remedy
Deactivate ”Simplified control” in the main
information. Press the i-button, select ”Select
control level” and call with
OK
. Set the
”Simplified control” to ”no”.
Log in VCR in the TV menu – Connections.
a) Wait until the timer recording has ended or
clear the timer.
b) Wait until you stop recording.
Deactivate program-related child lock: Switch off
child lock or enter PIN in the TV menu - Settings.
a) Activate Digital Link in the VCR (see operating
instructions of the VCR)
b) Connect the Euro-AV cable
c) Log in the VCR
a) Compare the connection diagram with the
actual installation in the ”Main information”
under ”Connections” and connect as shown if
necessary.
b) Set the correct norm.
c) Set the correct AV signal.
If ”Automatic” is set for AV norm or AV signal,
this can lead to wrong detection in the case of
non-standardized signals. In this case the norm
and signal must be set according to the operating
instructions of the external device.
Set the horizontal position:
1. Call the main information with
i
2. Call Index – Set picture – Horizontal
displacement
3. Set horizontal picture position.
BAQ25H_29792_022_4_GB
03.06.2002, 16:13 Uhr
21