11
•
One leg frame is mounted in the regular
way (F, see steps 1-3), the other leg frame
(G) is fastened with the connector fittings
(H) instead of spacer fittings (see step 1,
component B). Like the spacer fittings,
these sit between the main beam and the
mounting plate of a leg section.
•
The mounting point at the end of a main
beam is used (I).
12
•
Use two of the bolt points on the
mounting plate to connect the leg frame
to the main beam (M8x16).
•
Then use the four regular screw points
(M8x16) for the leg frame to connect the
connector fitting to the main beam there.
L
2
ENO
ASSEMBLY INSTRUCTIONS
WORKBENCH COUPLING
F
H
G
H
I
2x
2x
I
ATTENTION: Please pay a
t
tention to
the colour markings of the parts and
match them correctly to guarantee a
perfect fit.
!
