3.2 - Software setup
3.2 - Software setup
- Go to the ERGOMETER menu after botting up the system
- Select MENU
- Go to SETUP
- Select Default settings
- Set Exercise equipment connection to ON
If you want to use Blood pressure device in ergometer:
- Set Auto BP monitor connection to ON
- Set Auto BP monitor type to EGT
- Select Register to store the selection,
- Select Exam to store the selection and start a test.
The system is now ready for communication with the ergometer.
3.3 - Ergometer setup
3.3 - Ergometer setup
The following protocol needs to be set in the Lode ergometer to communicate with the external
equipment.
Bicycle ergometer: Ergoline P10
The next chapters describe the procedures to setup these protocols depending on the type of
ergometer.
5/22
INTERFACE SHEET - NIHON KOHDEN 1550K - CPET ERGOMETER / VERSION: 1.0 - 2016-01-15
