March ‘13
Manual Katana Sport
Page 3
934900M
Definition of parts
1.
Power cord
2.
Connectors, on/off switch
3.
Equipotential bonding plug
4.
Control Unit (optional)
5.
Wheels
6.
Walking surface with Slats
7.
Motor unit
8.
Handrails
9.
Elevation frame front
10.
Elevation frame rear (optional)
11.
Emergency stop in walking surface
12.
Emergency button (optional)
Install your Katana treadmill
1.
While unpacking the Lode treadmill, leave the transport straps on both ends in place.
2.
Place the Lode treadmill in the location where it will be used.
3.
Remove Both transport straps.
4.
Connect the power cord to the line output at the required voltage (see type plate)
5.
Remove all objects from the walking surface.
6.
Switch on the unit with the on/off button (#2 in above figure) and wait until the self-test is
carried out. The product is ready for use after you have heard a series of “beeps”.
7.
For more information and getting started with the Katana treadmill please consult the Operator
Manual on the CD rom.
Control the treadmill with Control Unit
You can operate the treadmill as a stand-alone device with the (optional) control unit.
1.
After switching on, follow the instructions on the screen for the settings
2.
Consult the manual for more information
Control the treadmill with External Device
1.
Connect the treadmill with the supplied cable to the external device. You can control the Katana
Sport with e.g. an exercise ECG device or Metabolic Card.
2.
Download the interfacing instructions from the internet at
www.lode.nl
after you have
registered your device.
3.
If your Katana Sport has a control unit, select “Terminal”- mode to allow external
commands. When the Katana Sport does not have a control unit the terminal
mode is automatically selected.
(See for detailed instructions the user manual of
your
external device).
