Lode ERGOMETERS, Руководство по обслуживанию

Страница: 34 / 51

Service manual Valiant treadmill V1.00 34
3.5 RS232 setup
The Valiant is default shipped with the LODE RS232 communication protocol.
It can be set to the following RS232 protocols.
0 LODE RS232 Protocol
1 HP Cosmos RS232 Protocol
2 Trackmaster RS232 Protocol ( default)
3 Woodway RS232 Protocol
4 Trackmaster RS232 Protocol in which data sent in Km/h will be displayed in
Miles/h
5 Trackmaster RS232 Protocol in which data sent in M/h will be displayed in Km/h.
Switch on the Valiant, Press and hold the two keys on the picture for 10 seconds and you will
enter the service menu of the Valiant
You can change the RS232 by following the procedure below:
•
Select “Prot id” and select the RS232 that you need to establish communication
between your device and the Lode Treadmill.( see for the correct RS232 protocol
in the list above)
•
Press the red button to leave the service menu.
•
Switch off the Valiant
The Lode Valiant is now ready for external control.