Lode BWSS, Руководство пользователя

Страница: 17 / 21

9 - Problem solving
9.1 - The BWSS does not work. The display on the control unit remains blank.
1. Make sure the BWSS is turned on
2. Check if the power cable is properly connected
3. Check if the connectors are properly connected. (read 3 Installing the BWSS)
4. Check if the control unit is properly connected. (read 3 Installing the BWSS)
5. Check the fuses
6. When necessary release the test person from the BWSS. (read chapter "Emergency release a test
person from the BWSS")
7.Call a service engineer.
9.2 - The lift mechanism does not work. The display on the control unit is on.
1. Turn the system off wait 10 seconds and turn the system back on to reset the internal motor
controller.
2. When necessary release the test person from the BWSS. (read 4.9 Emergency release a test person
form the BWSS)
3. Call a service engineer.
17/21 M932822 / VERSION: 1.0 - 2020-07-23