6.1 - Emergency stop installation
6.1 - Emergency stop installation
When your treadmill is delivered with an emergency stop, please note the
following:
The plug of the emergency stop button needs to be placed in the back
connector of the console on the front handrail.
Some emergency stop buttons have a connector for another emergency stop. You can place the spare
dummy there in case you have one button.
Also make sure that the magnet of the emergency lanyard is connected to the console.Otherwise the
treadmill will not operate.
7 - Control with an External Device
7 - Control with an External Device
If your device is fitted with a communication card you can connect to many external devices.
1. Connect the device with the supplied cable to the external device. You can control the device with e.g. an
exercise ECG device or Metabolic Card.
2. Download the interfacing instructions from the internet at www.lode.nl after you have registered your device.
3. If your device has a control unit, select “Terminal”- mode to allow external commands. When the device does
not have a control unit the terminal mode is automatically selected. (See for detailed instructions the user manual
of your external device).
8 - Control with Control Unit
8 - Control with Control Unit
You can operate the device as a stand-alone device with the (optional) control unit.
1. After switching on, follow the instructions on the screen for the settings
2. Consult the manual of the control unit for more information
9 - Control with the Lode Ergometry Manager (LEM)
9 - Control with the Lode Ergometry Manager (LEM)
1. If your treadmill ergometer has an RS232 or USB port connect it directly to the PC LEM is installed on. If your
device has a RJ45 connector plug it with an UTP cable to the special interface connector that was delivered with
your treadmill ergometer and to a USB port in your PC.
2. Start Lode Ergometry Manager on your PC
3. If your treadmill has a control unit, select “Terminal”- mode to allow external command. If your treadmill does
not have a control unit the terminal mode is automatically selected. (See for detailed instructions the user manual
of LEM).
10 - Maintenance
10 - Maintenance
9/14
M938925 / VERSION: 1.0 - 2015-01-09
