1. Please Observe the Following (continued)
1. UV protective glasses with side shields should be worn when working
with and around UV Wand systems. Glasses should meet ANSI Z87.1
certification. UV protective glasses should be available with the system
being tested. If they are not available, they may be purchased from
Loctite. Safety Glasses Item # 97210.
2. Potentially exposed skin should be covered. Long sleeves and
protective gloves should be worn when measuring UV Wand intensity.
3. Never look directly at the output from the UV Wand.
4. Make Sure that the Radiometer reading is Zero, before removing the
UV Wand from the Sensor Head.
When in doubt about UV safety, consult a Loctite technical specialist at:
1-800-LOCTITE (562-8483).
1.3
List of Parts Supplied
• UV Sensor Head
• Meter
• Operators Manual
2
985706 Zeta 7021 Rev A 4/17/02 4:15 PM Page 4
