Loctite PULSE EQ RC50, Руководство по эксплуатации

Страница: 12 / 41

12
•
Loosen the reservoir knobs (7) and remove the lid (8).
•
Check that there is no condensed moisture at the bottle or the
sensor surface.
•
Place the bottle in the bottle holder (see the right figure).
•
Check that the product bottle inserted in the bottle holder is
pressed again the level sensor.
•
Insert the product feedline into the bottle and put on the lid (8).
•
Uniformly tighten the reservoir knobs (7) by hand.
•
Set the depressurizing valve (2) to “ ON ” position (pressurize).
5 Operation
5.1 Turn on the Unit
Observe the operating manual of the EQ RC50 Integrated Dispenser I-4.0 used.
Turn the power switch (1) to ON
5.2 Main Page
1
2
3
4
5
6
7
8 9
10
11
12
13
14
15
16 17
18
19
20