Replacing The Nozzle
Only replace the nozzle while the tool is still warm. Disconnect the tool from the power
supply before proceeding, and always use protective gloves.
Remove the rubber safety cover from the nozzle. Unscrew the nozzle from the tool using a 13 mm
wrench (such as that in the plastic tool-stand). Fit the replacement nozzle, ensuring that it is
securely tightened. Replace the rubber safety cover.
Servicing and Repairs
The Loctite® Hysol
™
Hot Melt Applicator contains no user-serviceable parts other than the nozzle.
In order to avoid a hazard, any servicing or repairs, including replacement of the supply cord,
should only be carried out by the manufacturer, its service agent, or other similarly qualified person.
The tool should be disconnected from the electrical supply before any servicing or repair work is
undertaken.
Technical Data
Dimensions with base (L x H x W):
9 1/2" x 8 1/2" x 3 1/4"
(approx. 241 x 191 x 83 mm)
Total weight:
2.2 lbs. ( 1 kg)
Connection cable with mains plug:
78" long (1.8 m)
Operating voltage:
120 VAC 50/60Hz
Power consumption: approx.
250 W
Heating up time:
4-5 min.
Operating temperature:
Hysol
™
050A-HT 419°F (215°C)
Diameter of adhesive inlet:
1/2" (12 mm)
(Use only genuine Loctite® Hysol
™
hot melt
adhesive sticks)
Extension cable:
max. 65 ft long (20 m)
Wire cross section:
at least 16 a.w.g. (1.5 mm
2
)
Loctite® Brand Replacement Nozzle
