10
•
Place the bottle in the bottle holder (see the right figure).
•
Check that the product bottle inserted in the bottle holder is
pressed again the level sensor.
•
Insert the product feedline into the bottle and put on the lid.
•
Uniformly tighten the reservoir knobs by hand.
•
Set the depressurizing valve (2) to
“ON”
position (pressurize)
by hand.
•
Continue dispensing with the selected dispensing pressure.
5
Operation
5.1 First Operation:
Warning!
Before loosening the reservoir locking knobs (6), the EQ RC30 Manual Reservoir
must be depressurized (pressure-free)!
The EQ RC30 Manual Reservoir is depressurized when the reservoir pressure gauge
indicates no pressure.
In any case:
•
Set the depressurizing valve (2) to position (depressurize).
5.1.1 Inserting the Product Bottle
Follow procedure as described in section 4.3.
5.1.2 Priming the Feedline
•
Check that the product reservoir and the dispensing valve are connected correctly
according to their instruction manuals.
