background image

5

3. Technical Data

Air inlet ports

(2) 4" dia. and (2) 2.5" dia.  

Fan capacity 

700 cfm / 1165 m

3

/h

System capacity

200 cfm / 335 m

3

/h

Max. static pressure

3.5" WG / 875 Pa

Power supply

115 V, 1 phase, 60Hz

Motor rating

0.75 HP / 560 watts

Power consumption

10 Amps 

Noise level, approx.

60 dBA

Certifications

UL, CSA

Dimensions (W x D x H)

15.5" (395 mm) x 19.5" (495 mm) x 27" (685 mm)

Weight (approx.)

100 lbs. / 45 kg

4. Installation

4.1 Installation and Connection

In order to properly install the Air Filtration System, the following procedure should be followed:

• Open the Unit’s top cover by releasing the four latches and removing the lid.

• Remove pleated prefilter.

• Remove carbon filter tray.

• Install the white mat on the bottom of the metal carbon filter tray.

• Fill the carbon tray with activated carbon. The activated carbon is supplied in a separate bag. 

• Check to insure afterfilter mat is properly seated.

• Install carbon tray into Unit

• Install pleated prefilter.

• Install the Unit’s top cover and secure the four latches.

• Attach a flexible hose to the air inlet port(s), on the lid, using hose clamps. If the sum of the

ports are not being used, keep them closed with a blind cover.

• Attach the other end of the hose to a suction nozzle, exhaust arm, or matching duct.

• Assure that all duct and hose connections are airtight. Leakage will result in decreased

performance.

• External on/off foot switch: Connect the series plug, which is attached to the power cord coming

from the foot switch, to wall outlet. Plug the filter systems power cord (3-prong plug) into the
receptacle of the series plug. 

• The Loctite

®

Air Filtration System is ready to be turned on.

Содержание 98276













Отзывы: