Locomarine STANDARD 5 Series, Руководство по установке

Страница: 12 / 22

12
2.1. CONNECTING POWER SUPPLY
There are two ways to power Yacht Router Standard:
• directly from boat battery (10-30 V DC)
• via supplied AC/DC power supply and DC power cable adaptor
Most common way is to connect Yacht Router Standard directly to vessel battery using 2 m supplied DC power cable. Power cable consist of RED and BLACK wire. Connect RED wire to
positive (+) and BLACK wire to negative (ground -) power source on your vessel power supply system (battery).
IMPORTANT
Wrongly connected DC power cable can damage Yacht Router and void a warranty.
Voltage lower than 10 V and higher than 30 V can damage Yacht Router and void a warranty.
CHAPTER 2 - INSTALLATION