13
lococookers.com
OPERATION
LIGHTING YOUR SMARTTEMP™
PRECISION GRIDDLE:
•
Read all instructions before lighting.
Only light burners outdoors.
• Open lid.
• Make sure to clean and season
the cooking surface.
See “CARE &
MAINTENANCE” section.
1. Con
fi
rm that the control knob
is in the OFF position as
pictured, with the LoCo logo
horizontal.
2. Push in and turn control
knob counterclockwise to
Lo
position.
3.
SureSpark™ Ignitor
Lighting:
Press and continually hold the
ignition button until the burner
is lit.
TIP: After lighting . . .
Set your desired temperature and close the lid.
The SmartTemp™ control knob display will
cycle up to the set temperature.
Allow the control knob to cycle up twice before
cooking.
This dual cycling to the set temperature will
ensure that the cooking surface is heated
evenly.
Match Holder
5. If ignition does not occur in 5 seconds,
turn control knob clockwise to OFF, wait 5
minutes, then repeat the lighting procedure.
6. When the burners are lit, turn the control
knob to the desired preset cooking
temperature.
Cooking Temperature Presets
Lo • 275F • 300F • 325F • 350F • 375F
400F • 450F • SEAR
Match Holder
Match Holder
Match Lighting:
The match holder is located in a slot beneath
the griddle on the left side, secured by a chain.
1. Lower the small slot door to pull match
holder out.
2. Place a match into the end of the match
holder, then insert the holder with lit match
into the large hole on the side of the griddle.
3.
Push in and turn control knob
counterclockwise to the 275F position to
light burners.
