13
Feature Programming Through Menu Mode Using Master PIN code
1. Enter the 4-8 digit Master PIN code followed by the key.
2. Enter digit corresponding to the function to be performed followed by the key.
Language Setting Mode
**Network Module Setting
Volume Setting
All Code Lockout Mode
**This function appears only
with RF network module
installed.
Complete
Continue
Master PIN Setting*
1
3
4
2
5
Register User PIN
Register
Continue
Complete
User Number (UN)
1~25 : without network modile
1~250 : with network module
Delete
Enable
Disable
Default settings
in
bold.
Automatic Re-lock
Inside Indicator Light
One Touch Locking
Privacy Button Setting
Handing the Lock
Enable
Advanced Lock Settings
Disable
Enable
Disable
Enable
Disable
Performs automatic handling
of the lock
Continue
Complete
**Network Module Setting
High
Low
Silent
Volume Setting
Enable
Disable
All Code Lockout Mode
Join the network
Exit the network
**This function appears only
with RF network module
installed.
Note: If the lock is connected to a network
controller, it is recommended that it is
programmed through the centralised
interface (PC or hand-held device) to ensure
communication between the lock and the
controller unit.
Features
•
M denotes Master PIN
• denotes User Number
• U denotes User PIN
• PIN codes can be 4 to 8
digits in length
• The key is used to enter
or accept an entry, and
also to end a programming
session
• The key is used either
to enter or to continue
additional steps in a
programming sequence
