M4 Latch Screw
Latch Wear Pad
Latch
2mm Latch
Packer
Troubleshooting
Do I need to tap holes?
No. All screws are self tapping.
The furniture screws do not
tighten
Ensure the screws line up with the screw
boss on the exterior handle.
Do I have to use the
supplied screws?
For best performance, it is
recommended that only the supplied
screws are used.
The key function does not
operate
Ensure the motion of the latch is not
restricted.
Can not achieve 24mm
deadbolt throw
Ensure locks deadlock is set to ‘L’. Turn key
twice.
Deadbolt
Latch
Handle
Turn key
to throw
deadbolt
5. Latch Reversal
• Undo the M4 latch screw
• Reverse the latch as desired
• Refasten the M4 latch screw to secure the latch
• Insert the latch wear pad
Note:
2mm Latch Packer is provided to allow for latch
projection adjustment. An additional 2mm packer is
available for purchase.
6. Lock Operation
Deadlocking Operation
• Pull the door shut. The door will self-latch
• Turn the key towards the edge of the door to deadlock
Note:
For 13mm, turn the key once only
For 24mm, turn the key twice
• The door is now secure from exterior and interior
Opening Operation
• Turn the key away from the door edge to deactivate the deadlock
Note:
For short throw, turn the key once only
For long throw, turn the key twice
• Retract the latch
ASSA ABLOY New Zealand Limited
6 Armstrong Road, Albany, Auckland 0632
www.assaabloy.co.nz
Q50287_1221
ASSA ABLOY Australia Pty Limited
235 Huntingdale Rd, Oakleigh, VIC 3166
ABN 90 086 451 907 ©2019
1300 LOCK UP
www.assaabloy.com.au
