safe cleaner to free any potentially stuck wafers.
2) Use the alignment holes through the AccuReader
key to assist in judging the distance from one wafer
position to the next.
3) Place the insertion/release slide in the slot on the
A
ccu
R
eader key on the #3-6 side. Fully insert the
A
ccu
R
eader key into the keyway and remove the
slide. The AccuReader key is now ready to read the
#7 wafer.
(Note: If the AccuReader trapped a
wafer shortly after inserting it into the keyway,
use the release slide on the opposite side of the
key to release the AccuReader. This happens
when wafers fall into the trap slot for the 1-2 side,
since these locks have wafers only on one side.
Flip the AccuReader over and restart step 2).
4) Always
start reading with the #4 depth slide
tool, then proceed to #3 & #2 in order, if
necessary.
Fully insert the depth slide into the Accu-
Reader key. The alignment mark on the depth slide
will line up with the (
Y
)
Yes
mark or it will line up with
the (
N
)
No
mark.
a) If the #4 depth slide lines up with the
Y
then the depth for the #6 wafer is a 4. If the depth
slide lines up with a
N
, then you must proceed to the
#3 depth slide.
b) If the #3 depth slide lines up with the
Y
then the depth for the #6 wafer is a 3. If the depth
slide lines up with a
N
, then you must
proceed to the #2 depth slide.
c) If the #2 depth slide lines up with the
Y
then the depth for the #6 wafer is a 2. If the depth
slide lines up with a
N
, then the depth for
wafer #7 is a 1.
d) Repeat steps
a
through
c
for each wafer
position until you have recorded the depth for wafer
position 6, 5, 4, & 3.
e) Using the insertion/release slide remove
the AccuReader key from the keyway and flip it over.
Insert the insertion/removal slide on the #1-2 side of
the AccuReader and fully insert the AccuReader
key back into the keyway. You are now ready to read
wafer position #2.
f) Repeat steps a through c for each wafer
position until you have recorded the depth for wafer
position 2 & 1.
g) You now have recorded all the positions to
make a complete key.
TIPS& SUGGESTIONS
1) Always clean the keyway thoroughly before
starting.
2) Use the diagram on the protective case to identify
the YES line and the NO line when reading a lock.
3) Watch the demonstration video online at:
www.locktech.biz
KW14 compatibility list
rev. 3-31-09
MAKE
MODEL
YEARS
SPACES
Kawasaki
Vulcan 2000, 1600 Nomad, 1600 Classic, Mean Streak
2002+
7
Kawasaki
KLR650
2008+
7
Kawasaki
Vulcan 500, 800, 1500, KLR, KLX, Eliminator 125
(Can be KW14 or KW14R)
1987-2001
6
Kawasaki
Ninja 750
1991-1992
6
Kawasaki
KLX 650
1993-1996
6
Ducati
Most Models
1991-2002
6
Suzuki
Marauder 1600
2004+
7
Suzuki
Boulevard M95
2004+
7
Victory
Most models
1999+
6
MV Augusta
Most models
1996+
6
Cagiva
Mito 500
2007+
6
