3
6. INsTALL INsIDE MOuNTINg PLATE
5. INsTALL KEyPAD AssEMBLy
Pass the iC wire through the wire
hole on the mounting plate and affix
the mounting plate with screws. If
outside lock assembly is lopsided,
please loosen the screws to adjust
it’s position and tighten the screws
again.
mounTIng PLATE
iC wiRe
SCRewS
Place the leverset against
keypad with tailpiece in
vertical position inserted
through cam of the latch.
ensure the latch bolt is
retracted.
Pass the iC wire under the
latch to the interior side
of the door.
Pass the iC wire over the
latch to the interior side
of door.
Please refer to diagram B
for cylinder installation.
Place deadbolt against
keypad with tailpiece
in horizontal position
inserted through hub of
the latch.
A
A
C
B
B
TAILPIECE
ouTSIdE LEvER
CYLIndER
iC wiRe
DEADBOLT KEYPAD ASSEMBLY
LEVER KEYPAD ASSEMBLY
A
A
B
B
iC wiRe
C