C.
Changing camera port to not interfere with other device’s forwarded ports.
1.
Sign into the camera’s web setup page. The sign in page can be access by entering
the camera’s internal/private IP address followed by a colon and then the port
number. For example 192.168.1.25:8080
i.
The default username is “admin” and the default password is “password”.
2.
Select the appropriate browser mode.
i.
“Active X Mode” is for Internet Explorer only and requires a certain level of
permissions (for advanced users).
ii.
“Server Push Mode” is for alternative browsers such as Firefox, Safari, and
Google Chrome (recommended for most users).
3.
Navigate to “Network” and select “Basic Network Settings”.
4.
Change the “HTTP Port” to a non-conflicting port.
5.
Note it here:__________________________________________________________
6.
Follow the instructions in either method “A” or “B” to complete the process.
Advanced Camera Setup (for Port Forwarding users)
1) Navigate to https://connect.devicewebmanager.com and sign in to the administrator account. If no
account has been created, please create one via the “Sign Up” link on the login page.
2) Navigate to the “Camera” tab on the Dashboard and select “New Camera”. If the camera has already
been added from a failed UPnP attempt, then proceed to step 4.
3) Cancel the “Attempting to locate camera” process by clicking on the “configure camera manually”
link.
4) Click the “Settings” tab for the camera.
5) Click on “Advanced Settings” and enter in the missing information.
6) Select “Save” to update the settings. The camera should come online within 2-5 min.
