background image

INSTRUCTION MANUAL

COMPLIANCE AND APPROVALS

AUSTRALIA:

C-Tick Approval: N26682

Conforms to AS/NZS 60950.1

EUROPE:

Note: PC synchronisation may be lost if the unit is exposed to high levels of ESD and will require the 

software application to be re-started.

USA:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 

conditions:

1.  This device may not cause harmful interference.

2.  This device must accept any interference received, including interference that may cause 

undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for 

compliance could void the user’s authority to operate the equipment.

Responsible Party: Lock and Charge USA Inc, 307 6th St. W. West Fargo, ND 58078-1533, (701) 

630-9357, [email protected]

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates, 

uses, and can radiate radio frequency energy and, if not installed and used in accordance with 

the instructions, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

• 

Consult the dealer or an experienced radio TV technician for help.

“This Class B digital apparatus complies with Canadian ICES-003”. “Cet appareil numérique de la 

classe B est conforme à la norme NMB-003 du Canada”.

Shielded USB cable must be used with this unit to ensure compliance with the Class B FCC limits.

Содержание iQ Traveler 16









Отзывы: