LockMaster SCG 18H, Руководство пользователя, Страница: 9 / 19

8
·Get the desired chain tension by adjusting the chain bolts.
·Reliable rolling code technology
·Emergency release key in case of power failure
·Stop/Reverse in case of obstruction during gate opening/closing
·Built in adjustable auto-close (0, 30, 60, 90 seconds)
·Built in max. 90 seconds Motor running time (MRT) for multiple safety protection
·Reliable electromagnetism limit for easy adjustment
·Can be equipped with wide range accessories
Installation Overview
Installation of the Operator
Caution:
*Be sure that the operator is installed in a level and paralleled position and is properly secured.
Improper installation could result in property damage, severe injury, and/or death.
* Before starting installation, ensure that there is no point of friction during the entire movement of
the gate and there is no danger of derailment.
* Ensure that the
Warning Signs are present.
Necessary Tools:
The following tools may be necessary to install the Gate operator. You will need
screwdrivers, an electric drill, wire cutters and a wire stripper, a socket set, and possibly access to a welder.
When install the operator, you should build a concrete pad to support the base plate of operator in order to
maintain proper stability.
The installation proceeds are as follows:
1.
Dig a hole for a concrete pad which should be approximately 60 x 32 x 35cm (24
〞
x 13
〞
x 14
〞
). It may
protrude 10 cm (4”) above ground and 25 cm (10”) in depth underground. Increase the pad height if