*This hole (O) is for the optional Slotted Barrel
Extension provided for stabilizing your lock. It
will require drilling extra hole on your door
(See template as provided). Alternatively,
you may use the double-sided adhesive
tape provided which serves the same purpose
if you do not want to drill a hole. If you drilled
a hole, securely tighten the post with
a flathead screwdriver by turning it clock-
wise before mounting on your door.
M
O
B
Peel paper off the
Adhesive tape
1:
To secure Exterior Assembly of lock, peel the cover off the adhesive strips
INSTALLING THE EXTERIOR ASSEMBLY
Step 2
2:
Peel film from adhesive strips and make sure torque blade is in the vertical position with
the deadbolt extended. Place assembly and torque blade through the deadbolt slot
and guide connection cables through the cross-bore hole under the deadbolt as shown.
Complete mounting by aligning and securing until flush to exterior door surface.
EXTERIOR VIEW
(1)
6
Vertical
Extended
Under
