Lockly LATCH EDITION 6S, Руководство по установке

Страница: 5 / 23

4
Preparation
1 " - 2"
(35mm - 50mm)
2 "
54mm
1"
25mm
Backset
2 " (60mm)
or 2 " (70mm)
IMPORTANT NOTICE
*
Measure and confirm your door is
between 1
" - 2" (35mm - 50mm).
Measure and confirm the hole in the
door is 2
" (54mm).
Measure and confirm that the backset
is between 2
" (60mm) to 2 " (70mm).
Measure and confirm that hole in the
door edge is 1” (25mm).
* You are not required to drill an extra hole in your door. We have provided double-sided
adhesive tape for you to help stabilize the lock during installation. Only drill a hole if you
wish to have added stability. Please refer to the provided template for drilling if needed.
Use goggles to protect your eyes if you need to drill door holes.
Remove existing door hardware, latch or deadbolts before installing the new lock. Use
provided template to bore new holes if needed.
1
2
3
4
*Optional