4.1 Locking/Unlocking with Access Codes
Lockly
®
Smart Lock can be unlocked using multiple ways - via your stored Access Code,
registered fingerprint, smartphone with Bluetooth, the physical key supplied with your lock,
or voice.
OK Button
Three consecutive wrong attempts will put Lockly
®
in “Safe Mode”. (See Section 4.6)
Lock
your Lockly
®
by pressing the
OK Button
or by brushing your hand across the screen
anytime when the door is closed. The smart lock will also auto-lock after unlocking based
on your set auto-lock settings.
Slide your hand across the screen to activate
the keypad.
Enter your
6 to 8 digit Access Code
followed by
the
OK
button. Press
OK
anytime to reset if you
entered the wrong digit.
If the
Access Code
entered is correct, the door
will unlock. If the
Access Code
entered is incor-
rect, Lockly
®
will
flash red light.
Hold OK Button (3 sec)
You may toggle between two types of keypad
displays to enter your
Access Code.
The
fixed digit
version and the
PIN Genie
®
version (Recommended).
Press and hold the
OK Button
for 3 seconds to toggle
back and forth between the two keypads.
(Sample display shown only)
PIN Genie
®
Fixed Digit
SECTION 4.1
1
4
