IMPORTANT INFORMATION ABOUT YOUR LOCK
1. When the door is closed, the system locks automatically.
2. From the inside, unlock using the lever handle.
3. From the outside, unlock by pressing ‘C’ (CLEAR), followed by your User Code.
4. Your lock is equipped with a PASSAGE FUNCTION, allowing you to leave the door unlocked.
**USING THE PASSAGE FUNCTION WILL COMPROMISE THE SECURITY OF THIS LOCK**
To enable the passage function:
Press ‘C’ (CLEAR), then ‘Y’ (PASSAGE), then enter User Code.
To disable the passage function:
Press ‘Y’ (PASSAGE), followed by ‘C’ (CLEAR).
To disable the passage function PERMANENTLY:
Remove the ‘Y’ (PASSAGE) tumbler, leaving that slot empty.
IMPORTANT:
Always press and hold ‘C’ Button when removing and inserting Tumblers.
Refer to ‘How to Change Code’ instructions above.
