Lochinvar LB Series Скачать руководство пользователя страница 59

Страница: 59 / 60

www.lochinvar.com

LIMITATION ON IMPLIED WARRANTIES

Implied warranties, including any warranty of merchantability

imposed on the sale of this heater under state law are limited

to one year duration for the heater or any of its parts. Some

states do not allow limitations on how long an implied war-

ranty lasts, so the above limitations may not apply to you.

CLAIM PROCEDURE

Any claim under this warranty should be initiated with the

dealer who sold the heater, or with any other dealer handling

the warrantor’s products. If this is not practical, the owner

should contact: Lochinvar LLC 300 Maddox Simpson Pkwy

Lebanon, TN, 37090. Phone: 1-615-889-8900 or visit our

website: www.lochinvar.com.
Replacement Parts may be ordered through authorized ser-

vicers or distributors. Contact Lochinvar LLC 300 Maddox

Simpson Pkwy, Lebanon, TN 37090. Phone: 1-615-889-8900

or visit our website: www.lochinvar.com.
The warrantor will only honor replacement with identical or

similar water heater or parts thereof which are manufactured

or distributed by the warrantor.
Dealer replacements are made subject to in-warranty valida-

tion by warrantor.
PROOF-OF-PURCHASE AND PROOF-OF-INSTALLATION

DATE ARE REQUIRED TO SUPPORT WARRANTY CLAIM

FROM ORIGINAL OWNER.

DISCLAIMERS

NO EXPRESSED WARRANTY HAS BEEN OR WILL BE

MADE ON BEHALF OF THE WARRANTOR WITH RE-

SPECT TO THE MERCHANTABILITY OF THE HEATER OR

THE INSTALLATION, OPERATION, REPAIR OR REPLACE-

MENT OF THE HEATER OR PARTS. THE WARRANTOR

SHALL NOT BE RESPONSIBLE FOR WATER DAMAGE,

LOSS OF USE OF THE UNIT, INCONVENIENCE, LOSS OR

DAMAGE TO PERSONAL PROPERTY, OR OTHER CON-

SEQUENTIAL DAMAGE. THE WARRANTOR SHALL NOT

BE LIABLE BY VIRTUE OF THIS WARRANTY OR OTHER-

WISE FOR DAMAGE TO ANY PERSONS OR PROPERTY,

WHETHER DIRECT OR INDIRECT, AND WHETHER ARIS-

ING IN CONTRACT OR IN TORT.
Should governmental regulations or industry standards pro-

hibit the Manufacturer from furnishing a comparable model

replacement under this warranty, the Owner will be furnished

with the closest comparable water heater meeting the then

current governmental regulations and industry standards. A

supplementary fee may be assessed to cover the additional

cost associated with the changes made to meet applicable

regulations and standards.

MPORTANT INFORMATION

Model

Number

Serial Number

Date of Installation

www.lochinvar.com

322808-004

July 2012

Содержание LB Series





























































Результаты поиска

Содержание LB Series

Отзывы:

Похожие инструкции для LB Series

Бренды по названию

Популярные бренды

Lochinvar LB Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание LB Series

Отзывы:

Похожие инструкции для LB Series

Бренды по названию

Популярные бренды