4
| Locca Sure-Touch User Guide
How to
personalise
your system
The following programming features
can be simply carried out:
1. Setting the Time Delay
How long do you want the release
mechanism to stay open on pressing
the Locca Remote Key?
2. Erasing Locca Remote Keys
How do you erase Remote Keys
if lost or stolen?
3. Learning Locca Remote Keys
How do you add extra Remote Keys
to the system?
1. Setting the Time
Delay function
Please note: The Time Delay is the amount of time the
electric door release will remain unlocked. This can be
cancelled before the delay period ends with a second
press of your Locca Remote Key.
The system is pre-set for five seconds. This may
be what you want. If not and you would like to
personalise you entry time then follow the
steps below:
1. Press the Locca Master Key. This will activate
the Locca Receiver and prepare it for future
instructions.
The Locca Receiver will begin to beep and an
orange light will flash to indicate the system is
ready to move on to Step 2.
2. Now press and hold down the ‘delay’ button
on the Locca Receiver. The amount of time the
‘delay’ button is held down will be the amount
of time that the delay will be set for (i.e. if you
hold the button down for 10 seconds, the delay
will be set for 10 seconds).
While the ‘delay’ button is held down, the
Receiver will beep every second to confirm each
second registered. At the same time, a visual
green flash will be seen on the top Receiver light
for each second registered (i.e. if you hold
the button down for 10 seconds, the system
will beep 10 times during this period and flash
10 times, to indicate that the delay has been
set for 10 seconds).
When the ‘delay’ button is released the system
will confirm the time you have set the delay
for. The Receiver will beep quicker and flash
quicker for the period of time the delay is set
for (i.e. you will hear beeps and see flashes for
the duration of the delay).