•
One-week standby time
•
Movement Detection
•
Adjustable Critical Distance
•
Vibration Alarm.
2.3
System Specification
Standard
802.15.4a
Frequency
6.5 GHz
Detection Range
40 meters, 360 degree
Tracking Capacity
5 Anchors
Antenna
Internal antenna
Bluetooth Interface
Internal antenna, typical range 10 meters
Power Supply
Internal Lipo battery 500 mAh
Battery Lifetime
Active: 26 hours (without vibration);
Standby: 2 weeks
Battery Charge Time
Approx. 2 hours
Battery Charge Interface
USB micro
Dimensions
38x56x15 mm
2.4
Packing List
Safety Tag x1
USB charging cable x1
2.5
Usage:
•
Activation
The safety tag must be activated before it can be used for the first time. Hold the button (2)
until the Operation indicator (3) flashes with red-blue light for a short time. The Operation
indicator (3) will then flash with blue, indicating that the tag has been activated.
•
Ranging
Working state of the safety tag can be identified by the flashing Operation indicator (3) with
either blue or red light. In this state the tag is fully functional.
The Safety tag will vibrate 3 times (can be customized) when a Base station enters the danger
zone. It will only vibrate 3 times for the same Base station, unless the Base station exits the
danger zone and enters again
•
Sleep mode
After round 1 minute (can be customized) without any movement detected, the safety tag turns
into sleep mode. Operation indicator (3) turns off completely in this state and the safety tag is