10
Setting the S4 through S4-H,S4-U, the factory default state will change. According to actual
environment,Users need change carefully to avoid protector's abnormal using and even
happen a dangerous accident.Don't shut off the power or pull out the cable during the process
of setting.If the data written wrong, please write data again. After setting, check again, make
sure that the result is right.
Before using, make sure the PC or notebook has installed S4 special self-help software.
1. Connect USB to USB controlling box and PC. Connect 9 core cable to recever and USB control
box.
2. Open the S4 special self-help software, then enter user name and password.(default user
name:
laienkeji
password:
00000000
). Click the login button, enter the following interface:
3.3 The function and operation of the self-service software
The software user name and password must be modified in the first time,
and there must be a special person responsible for control to prevent
unnecessary amendments .
3. Clicking "open the device" button will open all software functions
Instructions:
Select the "instructions" through the cursor, press OK. The device will enter the interface of
instructions.
About LNTECH:
Select the "about LNTECH" through the cursor, then press OK button. You can get the contact way of
the company.
