Last edition 2010
www.LNSGAS.COM
PAGE 2 of 3
QSM SX2106-LCD
HOW TO START THE SONIMIX
Connect the SONIMIX to the power line
Check if the setting voltage is correct (100V/110V or 230V)
Connect the SONIMIX to the gas Cylinders and application
ONLY USE ELECTROPOLISHED STAINLESS STEAL TUBES
Set the pressure regulator of the cylinders to 3 bar rel
Set the operation parameter
Set the purge and rinse time (configuration\general)
Connect the outlet of the SONIMIX to your application
Connect the bypass of the SONIMIX to an exhaust
USB
Outlet
Mixture
230 V
Power line
RS 232
Waste /
Outlet
Inlet
Diluted
Outlet
purge
Inlet
Nitrogen
Inlet Air
Ethernet