We are here to help: [email protected]
www.lnchome.com
Item Number: A03176
WARNING
(To reduce the risk of fire, electric shock, or injury to persons):
1.
We suggest installation by a
licensed electrician
.
2.
Please read the instruction carefully and save it as you may need it at later time.
3.
Before you start,
NEVER
attempt any work without shutting off the electricity until the work is done. A). Go to the main
fuse, or circuit breaker, box in your home. Place the main power switch in the “
OFF
” position. B). Place the wall switch in
the “
OFF
” position.
4.
Mounting surface should be clean, dry, flat, strong enough and 1/4” larger than the canopy on all side. Any gaps between
the mounting surface and canopy exceeding 3/16” should be corrected as required.
5.
Make sure that the ceiling or wall can stand the weight of the lamp before fixture.
6.
Make sure the voltage you are using is
120V
. The maximum wattage is
60W
per bulb.
7.
Keep the lamp away from acidic and basic objects in case of damaging the surface of the lamp.
8.
When replacing bulb, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot quickly.
9.
The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be
understood that common sense, caution and care must be used with any electrical products.
Image for finished product:
Accessories List: