lmp NexGen Keypad WKP-803, Руководство пользователя

Страница: 10 / 47

Power Management
The LMP NexGen Keypad has a power safe mode. Once you turn
off your Mac the LMP NexGen Keypad will go to sleep in order
to save battery power. To wake it up, press any key on the LMP
NexGen Keypad and it will re-connect within a few seconds.
4
To power off the LMP NexGen Keypad, move the power lever to the „Off“
position. You should see the message „lost connection“ on you screen.
4
To power on the LMP Nex Gen Keypad again, move the power lever to the
„On“ position and press any key on the LMP NexGen Keypad. You may see
the message „connected“ on your screen or in the Bluetooth assistant. You
can use the LMP NexGen Keypad again.
4
The LMP NexGen Keypad displays a low-battery warning by flashing LED
in the interval of 1 second on (green) and 1.5 seconds off (no LED). You
should change the battery now to avoid any sudden loss of connection.
4
To change the battery turn off the LMP NexGen Keypad, insert a of fresh
battery and turn on the Keypad. Press any key and the connection should
be re-established. If you do not get a new connection you may have to
re-pair the LMP NexGen Keypad. Follow the Manual „Pairing the LMP Nex-
Gen Keypad in Mac OS X“.
4
The LMP NexGen Keypad greatly reduces the power consumption automa-
tically when it is in idle mode (connected, but no keying). In fact, the power
consumption in idle mode is only about ¼ (about 0.65 mA) of the con-
sumption of the keying mode (typing on the LMP NexGen Keypad; about 3
mA). This feature greatly extends the battery life.
4
The LMP NexGen Keypad uses 1 AA size battery. You can either use non
rechargeable or rechargeable battery.
The pairing time of LMP NexGen Keypad with your Mac computer
normally just takes a few seconds. However, it may take up to 40
seconds with some Bluetooth dongles.