E-mail support
LMI Corporation
Phone support
(810) 714-5811
Form: CA 045
May 5, 2005
C:\Documents and Settings\timmartin\Local Settings\Temporary Internet Files\OLK9\CA
045 LMI 241-BWV2 to 440 or 501.doc
Page 3 of
12
It is recommended to assign a simple user name to the gage files such as; flush, margin, etc. This will
help to identify different gage setups.
4.
To assign the gage file name, press
▲
or
▼
to highlight “G2”* in the “Gage List” and press
<enter> on the collector.
*G2 has the ability to support “sub files”. These are files that allow multiple styles or configurations of gages to be used by
the same collector. To create sub files highlight G2 and press
►►
, this will create a sub file of G2a. Each press of
►►
creates another sub file. The balance of this instruction will be based on G2
5.
Use the
▲
,
►
,
◄
, or
▼
to highlight the first character of the new file name then press <enter>, or
use the keypad on the 501 handset. Repeat the process until the gage file name is spelled. Then
press
►►
to accept the new name.
6.
Press the
►
to “Configure”, by default the
screen may read as follows.
